International Paint Products

Perfection
A 2-pack high performance polyurethane, providing extremely durable gloss that will last up to 5 years. Can be used on wood, GRP, steel and light alloy over appropriate primers. May only be applied over exisitng 2-pack paints, 2-pack primers, Perfection Undercoat or UCP. Available in 750ml & 2.5lt - Thinners No.9

YHA183/A750: Platinum 750ml
YHA184/A750: Mediterranean White 750ml
YHA192/A750: Off White 750ml
YHA216/A750: Royal Blue 750ml
YHB000/A2.5: Snow White 750ml
YHB663/A750: Jade Mist Green 750ml
YHF991/A750: Mauritius Blue 750ml
YHK990/A750: Flag Blue 750ml
YHS056/A750: Fighting Lady Yellow 750ml
YHS070/A750: Cream 750ml
YHS299/A750: Rochelle Red 750ml
YHE294/A750: Chilli Red 750ml
YHY999/A750: Jet Black 750ml

Toplac
Premium 1-component topside gloss paint. A high performance formulation, it will retain its colour and gloss up to 3 times longer than conventional gloss paint.
Available in 750ml & 2.5lt - Thinners No. 1

Brightside
Brightside is a superior quality 1-pack polyurethane quick-drying enamel whose superb flow characteristics allow a sprayed on appearance to be achived by brush application. Brightside is the only yacht finish in the world that contains Teflon.

Finishes, Undercoat & Varnishes

Interdeck
Specially formulated anti-skid deck paint designed for use over all suitably primed substrates. Available in 750ml - Thinners No. 1
Non-slip Additive – For addition to either Brightside, Toplac or Perfection to provide a non-slip surface.
Available in 250g sachets - 1 sachet per 750ml paint

Pre-Kote
Undercoat for Toplac and Brightside.
Available in 375ml, 750ml & 2.5lt - Thinners No. 1

Perfection (U/coat)
A high performance extremely tough, long lasting 2-pack undercoat for use under Perfection gloss. May only be applied over existing 2-pack finishes or primers, or UCP. White can be tinted with up to 10% of Perfection gloss to achieve a range of colours.
Available in 750ml - Thinners No. 1

YRA003/A750: Perfection 709 Undercoat White 750ml
YRA801/A25: Polyurethane Blue Base Coat 2.5ltr
YRA800/A25: Polyurethane White Base Coat 2.5ltr

Schooner/Original
Schooner varnish is easy and quick to apply and is heavy bodied for quick build-up. Excellent flow out to smooth finish with a deep, luxurious gloss.
Available in 375ml & 750ml - Thinners No. 1

Original – A conventional general purpose yacht varnish with good gloss retention, UV filters and excellent non blooming qualities. Easy to apply over any type of existing varnish and easy to recoat. It is suitable for interior and exterior use, whatever the construction.
Available in 375ml, 750ml & 2.5lt. - Thinners No. 1

Goldspar/Goldspar Satin
This internationally renowned varnish gives a full gloss polyurethane finish. It is easy to use and dries very rapidly making it ideal when fast overcoating is necessary.
A hard varnish, it is abrasion resistant and UV resistant and can be used over existing varnish.
Available in 375ml & 750ml - Thinners No. 1

Sikkens
Following an agreement with its parent company, Akzo Nobel, International Coatings will now be distributing the Wood Care Range from Sikkens Yachtpaints. The range encompasses three products that have been designed to provide the ultimate wood care treatment for the end user, with the added benefit of it being tried and tested in the Dutch market, which is renowned for its quality standards.

Varnishes, Primers & Fillers

Perfection Varnish & Sealer
A tough 2-pack polyurethane varnish, with UV filters providing high resistance to water and abrasion. Can be burnished. Only apply over existing 2-pack varnish or UCP. Available in 750ml & 2.5lt - Thinners No. 1

Clear Wood Sealer – Fast Dry
A premium fast drying, clear 2-part polyurethane primer. Its fast dry properties enable up to 4 coats to be applied in 1 day*.
Clear Wood Sealer is suitable for use above the waterline and on both interior and exterior surfaces where it provides an exceptional impact, scratch and wear resistant primer surface ready for overcoating.

YVA853/A750: Perfection (2 pack gloss) 750ml
YMA117/1: Intertox Wood Preservative 750ml
YVA327/10: Clear Wood Sealer Fast – Base
YVA328/10: Clear Wood Sealer Fast – Curing Agent

UCP (Universal Clear Primer)
A universal clear primer for bare wood. Exceptional adhesion properties make it ideal as a primer to be overcoated by most International finishes or varnishes.
Note: Do not use in conjunction with Intertox. Do not use on oily wood.
Available in 375ml - Thinners No. 9

YPA600/375: UCP Wood Primer - Clear 375ml

Primocon
A quick drying, general purpose below waterline primer, ideal for metal keels and hulls prior to antifouling, or for use as a barrier/sealer coat between unsound/unknown or incompatible anitfoulings.
Available in 750ml, 2.5lt & 5lt - Thinners No. 1

Yacht Primer/Etch Primer
Metallic grey general purpose primer for use on wood, stell and alloy above water.
Available in 750ml & 2.5lt - Thinners No. 1

Self Etch Primer – An essential primer for the pre-treatment of alloy surfaces. Apply one coat only.
Available in 500ml - Thinners No. 7

YPA275/2.5: Yacht Primer (Wood & Steel) 2.5ltr
YPA275/750: Yacht Primer 750ml
YPA110/A500: Self Etch Primer (Alloys) 500ml

Interprotect
High performance, 2-component, quick drying epoxy based primer for high performance paint schemes on all substrates.
Available in 750ml, 2.5lt & 5lt - Thinners No. 7

Interfill 100 Wood Filler
A conventional above-the-waterline wood filler, now packaged as part of the Interfill range. Interfill 100 Trowel Cement is quick drying and has a creamy texture for filling screw holes and small, fine cracks in paintwork. The matt white filler is touch dry after approximately 1.5 hours.
Available in 170ml - Thinners No. 1

YAA041/170: Interfill 100, 170ml

Watertite/Interfill Epoxy Filler
Watertite/Interfill Epoxy Filler Kit – A quick drying epoxy filler ideal for long-lasting repair onto all substrates. Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman. This 2-part formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes at up to 2cm depth per application. It has excellent resistance to water penetration.
Available in 250ml & 1lt - Thinners No. 7

Antifoulings

Optima
The ultimate performer in eroding antifoulings. Includes revolutionary Activator and new resin system for unparalleled effectiveness. Ideal for racing yachtsmen and anyone who wants to end mid-season haulouts and scrubbing. Contains Copper Oxide and Zinc Pyrithion.
Available in 2lt - Thinners: Water
Note: This product is not registered for sale in the Republic of Ireland.

YBA903/AZ: Micron Optima White (Advance perform A/F) 2ltr
YBA973/AZ: Micron Optima Light Blue 2ltr
YBA953/AZ: Micron Optima Red 2ltr
YBA903/AZ: Micron Optima Black 2ltr

Micron Extra
High Strength, self-polishing antifouling which provides up to two seasons protection in high fouling areas from one application (3 coats). Improved resin system offers more time between application and immersion – up to 12 months. Now contains Biolux. Suitable for use on GRP, Wood and Steel. Contains Copper Oxide and Preventol A4S.
Available in 750ml & 2.5lt - Thinners No. 3
Note: This product is not registered for sale in the Republic of Ireland.

Cruiser Uno
One cost antifouling, 1 seasons protection formulated for both power (25 knots) and sailing boats.
Available in 750ml & 3lt

Bottom Coat
General Purpose Antifouling for sail and power boats containing Copper Oxide and boosting biocides (contains Copper Oxide and Zineb)
Available in 2.5lt

Interspeed Ultra
No longer just extra strong, a new, improved formula makes this superior antifouling ultra strong. Containing Teflon® it provides a smoother, harder, more slippery surface which deters fouling attachment for a clean, slick hull. It is ideal for high-speed crafts or craft on drying moorings. Can be burnished. Contains Biolux and Teflon. Contains Copper Oxide and Preventol A4S.
Availoable in 750ml & 2.5lt - Thinners No. 3
Note: This product is not registered for sale in the Republic of Ireland.

Trilux
New medium performance, hard antifouling suitable for all substrates including aluminium. Offers protection in medium fouling conditions where a hard, scrubbable antifouling is required. Containing Teflon® it provides a smooth, hard, slippery surface which deters fouling attachment, and can be burnished. Ideal for fast power boats and craft on dry moorings. Contains Biolux and Teflon. Available in brilliant white & bright colours with long term colour stability. Contains Copper Thiocyanate and Preventol A4S.
Available in 375ml, 750ml* & 2.5lt* - Thinners No. 3
Note: This product is not registered for sale in the Republic of Ireland.
*Available in Brilliant White only in these pack sizes.

Nautical
Protection from fouling on a budget. Eroding technology. Compatible with other International products.
Available in 2.5lt - Thinners No. 3
Note: This product is not registered for sale in the Republic of Ireland.

YBA885/2.5: Antifouling Blue 2.5ltr
YBA883/2.5: Antifouling Black 2.5ltr
YBA884/2.5: Antifouling Red 2.5ltr

Thinners & Bottom Coatings

Thinners
VC – General Thinner
Only one thinner is needed for use with all VC System products. VC-General Thinner can be used as both a thinner and equipment cleaner and to remove VC 17m Antifouling.
No. 1 – For use with 1-pack paints and varnishes.
No. 3 – For use with antifoulings except VC and Optima, and when spraying 1-pack varnishes and finishes.
No. 7 – For use with epoxy.
No. 9 – For use with 2-pack polyurethanes and UCP.
No. 10 – For use with 2-pack polyurethanes and for spraying 1-pack varnishes and finishes when a faster thinner is required.

IVCTHIN/1: VC General Thinners 1ltr
ITHIN1/1: Thinners No. 1 (Conventional Paints, Varnishes) 1ltr
ITHIN3/500: Thinners No. 3 (Antifoulings, except VC & Optima) 500ml
ITHIN3/1: Thinners No. 3 (Antifoulings, except VC & Optima) 1ltr
ITHIN7/1: Thinners No.7 (Epoxies) 1ltr
ITHIN9/1: Thinners No.9 (Polyurethanes) 1ltr
ITHIN10/1: Thinners No.10 (Spraying Polyurethanes) 1ltr
ITHIN333/500: Thinners 333 (Brightside & Single Pack Enamels) 500ml

VC Offshore
The ultimate high strength antifouling with Teflon for the demanding sailor.
Available in 750ml &2lt
Thinners: VC-General Thinner
Note: This product is not registered for sale in the Republic of Ireland.

VC-Prop-O-Drev
VC-Prop-O-Drev/ VC-Prop-O-Drev Primer – A low friction antifouling with Teflon. It is ideal for use on outdrives, propellers, trim tabs etc, where the aerosol container ensures easy applicationof the antifouling to awkward areas. It is suitable for use on aluminium. Contains Copper Thioyanate and Irgarol 1051. VC-Prop-O-Drev available in 500ml. VC-Prop-O-Drev Primer Available in 300ml aerosol.
Thinners: VC-General Thinner
Note: This product is not registered for sale in the Republic of Ireland.

YBA798/500: Antifouling Black 500ml
YBA768/500: Antifouling Grey 500ml
YPA688/300: Primer 300ml

Danboline
High opacity bilge paint with excellent coverage. Ideal for bilges and engine bays.
Available in 750ml & 2.5lt - Thinners No. 1
Available in Grey, Red and White

Interstrip
An antifouling stripper product formulated for removing antifouling from all substrates. Safe to use on glass fibre without harming the gelcoat.
Available in 1lt, 2.5lt & 5lt - Thinners No.3

Gelshield 200/VC Tar-2 Osmosis Treatment
VC-Tar 2 is a 2-component epoxy primer which protects against osmosis in GRP, and provides anti-corrosive protection on steel and alloy. It provides a smooth surface without sanding. Compatible with VC-Tar.
Available in 1lt & 2.5lt - Thinners: VC-General Thinners